MICRO TRAP MT 1000 and MT 2000
Still the top of the line when it comes to high efficiency air filtration. All stainless steel with welded construction and state of the art controls. HEPA filter is preceeded by two other filters that are easily changed and collect all bulk debris. Every unit is leak tested and certified to meet
ANSI Z-9.2 standards. 10 year guarantee and U.L. Certification available.
 MICRO TRAP MT 1000 |
MICRO TRAP MT 2000 |
|---|---|
| Built to ANSI standard Z9.2 | Built to ANSI standard Z9.2 |
| Enclosure: 16 GA #304 stainless steel - all welded construction* | Enclosure: 16 GA #304 stainless steel - all welded construction* |
| System Type: Variable speed, direct drive blower | System Type: Dual Speed, direct drive blower |
| Speeds: 450 CFM to 1000 CFM with clean filters | Speeds: High speed 2000 CFM and low speed 1000 CFM with clean filters |
| Exhaust Duct: 12" diameter | Exhaust Duct: 12" diameter |
| Overall Dimensions: 33 1/2"L x 16"W x 25 3/4"H | Overall Dimensions: 33 3/8"L x 26 1/2"W x 30 1/4"H |
| Weight: 95lbs (w/o filters) | Weight: 165 lbs. (w/o filters) |
| Motor: High efficiency 1/2 HP, 1500 max RPM continuously variable w/thermal overload auto-reset switch | Motor: High efficiency 1.5HP, 1725/1140 rpm with thermal overload auto-reset switch |
| Power Requirements: 110 VAC 60Hz, 4.5 to 9 amps, single phase | Power Requirements: 110 VAC 60Hz, 15 amps, single phase |
| Casters: 3 1/2"HD swivel, 2 with locks | Casters: 3 1/2"HD swivel, 2 with locks |
| Control Panel: On/Off switch with circuit breaker, variable speed switch, pressure gauge, cord connector** | Control Panel: On/Off switch with circuit breaker, Hi/Lo switch, pressure gauge, cord connector** |
| Filters: 14" x 20" x 11 1/2" HEPA | Filters: 24" x 24" x 11 1/2" HEPA |
|
|
|
|
